Crack - cracks in the drying process after brushing paint. Solution: 1, ambient temperature and grass-roots must be higher than the minimum film-forming temperature low viscosity resin paint Zibo, general environmental temperature is higher than 5 ℃; 2, do not brush too thick a construction Zibo low viscosity of the resin, master Erdao brushing interval; 3, to ensure flexibility between coats match Zibo low viscosity of the resin, in the Periophthalmus embossed base surface is applied to the choice of resistance to cracking good latex paint; 4, to avoid high temperatures Construction in direct sun and windy conditions. Such as alkyd or oil paint top coat lacquers added; after a film containing a rosin resin lacquer coating applied; anti-corrosion coating paint on alkyd paint; alkyd or oil paint on a greased oxidized rubber coating, polyurethane coatings. Strong solvent penetration and swelling of the film coating bite from the lower layer. By coating the coating does not dry on the paint together. Such as perchlorethylene enamel or varnish is not dry Zibo low viscosity of the resin, add a second road paint coating. When coating paint finish or the next, using too strong a diluent, the primer to swell. High solid resin, resin Zibo Boshan chemical light provided by the light Boshan chemical plant. Boshan Light Industry Chemistry Plant (www.cnsimei.com) strong, credible, Shandong Zibo acrylic resin industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Boshan Light Industry Chemistry and you hand in hand into the brilliant, for a better future!